Macrom M-DVD902RV Bedienungsanleitung

EnglishALDINET S.P.A.VIALE C.COLOMBO, 820090 TREZZANO S/N (MI)ITALY

Setting up your DVD player PACKAGE CONTENTS Name of parts Quantity Player 1 IR remote control with battery 1 AV cable 1 ST4.2x16 screw 6 CM 4x8

Installing your DVD player Note: Do not attempt to install or service your player by yourself. Installation or servicing of the player by persons with

1. Battery + lead (Yellow) To connect the positive terminal of the car battery. 2. ACC Power Lead (Red) To ACC power lead powered when engine key

To install the player 1. Make sure that what kind of power system your car is. Please slide to “-” at the left position if your Vehicle’s power suppl

9. Attach the DVD player to the metal mounting plate using the CM 4x8 screws. 10. Reconnect the terminal of the battery. Notes:  Do remember t

Using your DVD player Adjusting the DVD player To open the DVD player 1. Press Open Button to unlock the LCD panel. 2. Swing the DVD

Using remote control 1. Pull out the battery holder. Follow the arrow 1 slide it to the right toward the battery while at the same time pull t

Replacing the battery If the remote control does not function, or if the operating range becomes reduced, replace the old battery with new one.  Dis

Turning off the player Press the button again, the player will be turned off. 1. If there is a disc media in the player, it will continue playback

Changing the audio language during Playback (Multi Audio) 1. Press AUDIO button to change audio track during DVD playback. The current audio

Welcome Thank you for buying the Roof Mount LCD Monitor with DVD player. Please read this manual carefully before using the Roof Mount LCD Monitor wi

To repeat a custom segment: 1. During playback, press A-B to set the starting point “A”. 2. Press A-B again to set the ending point “B”. The player p

Playing MP3 CDs MP3 is a format for storing digital audio. An audio track is compressed into the MP3 format with little loss of audio quality, while

3. Press the up or down button on the remote control to select a file, then press ENTER to play the file. 4. Press the to move to the next file

Connecting to the USB storage 1. Inserting the USB storage into the USB socket of the main unit. 2. When the unit sets in DVD mode, pressing SRC on

System setup Changing the picture quality and setting the frequency of FM transmitter Accessing the menu To adjust the picture, use the menu button

Using FM transmitter To use the FM transmitter for audio: 1. Press and hold MENU on the remote control for more than one second. The Operation MENU o

TV TYPE: Selects the TV system .You can select from following: ·PAL ·AUTO ·NTSC AUDIO: Selects the audio track language. You can selec

Customizing DVD settings To set the general setup page: 1 Press SETUP button on the remote control. The DVD setup menu opens. 2 Press < or > to

Troubleshooting If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the unit on and off. If

28 Problem Cause Solution The picture on the screen is dark. 1. The equipment locates at a low temperature area. 2. Brightness is set too low. 1.

or servicing of the display by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could e

Maintaining Handling discs  To keep a disc clean, do not touch the play side (non-label side) of the disc.  Do not attach paper or tape to the

DVD player features This player is a Roof Mount 9.2" TFT-LCD Color Display with DVD player that can be used as a stand-alone display, or can be i

Multi-angle Function A DVD video that is filmed from multiple angle which allows you choosing to view from different perspectives. Subtitle Funct

DISPLAY Item Name Function or Control 1 Dome Light Provides an interior light for the vehicle. 2 Reset button Press with a pencil or other nar

Item Name Function or Control 9 Panel open button Press to open the LCD panel. 10 (SKIP-) button Press to skip the previous chapter on DVD or tr

REMOTE CONTROL Item Name Function or control 1 Power Press to turn the player on or off. 2 Setup Press to access the setup menu to modify the DVD

Item Name Function or control 9 Arrow and ENTER buttons Press to navigate in a menu and change setting values. 10 FR Press to fast reverse playback